DIY Spring Time Yellow Dangle Earrings
*
*
*
Supplies you are going to need...
~ Needle Nose Pliers
~Floral Wire Cutters
~ 4 Straight Head Pins
~ 4 Large Bead Caps
~ 4 Small Bead Caps
~ 2 Wire Connectors
~ 2 Large Round Beads
~ 2 Small Beads
1. Start by threading the small bead cap and the large bead cap onto a head pin.
2. Thread the big bead after the first set of bead caps.
3. Thread the next two bead caps onto the head pin.
5. At the base of the beads bend the head pin at a 90 degree angle.
6. Cut the excess head pin.
7. Be sure to leave about 1/4 inch on the head pin.
8. Using the needle nose pliers bend the head pin into a loop.
9. Next bend the next head pin into a loop.
10. Cut the "head" off the same head pin, so you can thread the bead onto it.
11. Next thread the small bead onto this head pin.
12. Open the loop on the end of the small bead head pin, attach to the connector.
13. Close the loop of the head pin.
14. You should have the finished beads at this point and it can be attached easily to an earring hook.
15. Completed earring
16. The Finished Pair of DIY Spring Time Yellow Dangle Earrings.
'
